თებ . 17, 2025 15:50 სიაში დაბრუნება

Does the tubing specification refer to the circumference or diameter of the tube?-How to choose the basics of the tubing specification!

When selecting the size of the hose you need, you must select the size of the hose according to the diameter of the tube. The specification of the hose is in millimeters, if the specification of the hose is 40-60, it can be used in the diameter of the pipe is 40mm, 41mmm, 42mm is the specification of the hose, and the specification of the hose can be used as long as the diameter of the tube is included. 58mm. 59mm, 60mm. In simple terms, the diameter of the tube.

As shown in the picture above, the diameter of the tube is 47mm, and in order to demonstrate, I took a 40-60 gauge stainless steel hose clamp, and this hose specification contains 47mm, and this hose can be used.

As shown in the figure above, the 40-60 hose clamp is used on a hose with a diameter of 47 mm, and the effect is tightened.

There are 27-51, 33-57.40-60.44-67.46-70 and many other pipe clamp specifications in the stainless steel hose specifications, which contain 47mm, indicating that these kinds can be used, as long as the hose clamp specifications contain 47mm, it can be used, like the above specifications can be used in the case of selection, choose 27-51 This hose clamp specifications are easy to use, and beautiful after installation.

If the hose is installed in a vehicle or mechanical equipment and cannot be removed, you can wrap the hose around it with a string and measure the total length, dividing by 3.14, which is the diameter of the tube.

გააზიარეთ

შემდეგი: