Jul . 28, 2024 13:30 Kembali ke daftar

What is an American Hose Clamp? What are the characteristics of American hose clamps?

Hose clamps are a very commonly used accessory, which is divided into British hose bands and American hose bands. Many mechanical equipment and pipelines require the use of hose bands. The following editor will take you to see what is an American hose clamp and what are the characteristics of an American hose clamp?

　What is an American-style hose clamp

American hose clamp is one of the stainless steel hose clamps, the product uses the steel belt through the hole process, so that the screws tightly bite the steel belt, the screws use the hexagon head in the middle plus a cross or a slotted screwdriver corresponding to the fastening method, so that it can play the advantages of convenient operation, strengthen the efficiency of product use, the product is used in the automobile, motor, tractor, mechanical car oil, water, gas circuit, so that the pipeline connection seal is more firm! In the American hose clamp, it is divided into small American, Chinese-American, and large-American. It is determined by the width of the steel belt. THE WIDTH OF THE SMALL AMERICAN STYLE IS 8MM, THE WIDTH OF THE AMERICAN STYLE IS 10MM, AND THE WIDTH OF THE LARGE AMERICAN STYLE IS 12.7MM. The materials commonly used in American hose clamps are: stainless steel (201/304/316), carbon steel surface white zinc plating.

What are the characteristics of American hose clamps

Because the bite groove of the American hose clamp steel belt is penetrated, and the teeth of the screw are inserted, it is more powerful when locking. Precise bite. However, because the steel belt is permeable, the steel belt is easy to break when the tensile force is strong. This tensile performance is relatively stronger than that of German hose clamps. The hose clamp is widely used in the leather pipe connection of automobile pipelines, water pumps, fans, food machinery, chemical machinery and other industrial equipment. Elegant. The bite groove on the steel belt of the American-style hose clamp is through, and it is hollow and stamped. There are two types of grooves: rectangular hole and willow leaf hole. The worm gear screw on the hose hoop, the screw teeth are embedded in the hollow groove, and the screws are generally used to tighten the diameter of the hose hoop steel belt, so as to have the locking effect.

American-style hose clamps are generally made of stainless steel, using a steel belt perforation process

Membagikan

Berikutnya: